Hi Rudolf

I saw the photos of your boat (Wild Thing) anda I would like you tell me how you solve the problem of the chain of the anchor. How does it falls after being driven by the winch?
Can you send me some photos os the solution?

Please asnwer to grc@csca.pt

Best regards

Gonçalo Costa

In the bow of the boat, I have a watertight strip on the bottom of 30 cm and on the sides and top of 10 cm high, 9 mm thick waterproof plywood laminated.
For this border I have a shot of 4 mm thick waterproof plywood fastened with 4 screws.

The Coronet 26 family is shot fitted as standard.


For the water that comes into this room I have at the bottom of the anchor chain storage drilled a hole of 10 mm.

See attached photos.


I fören på båten, jag har ett vattentätt band på undersidan av 30 cm och på sidorna och toppen på 10 cm hög, laminerade 9 mm tjock vattenfast plywood.
För denna gräns har jag en bild av 4 mm tjock vattenfast plywood fästs med 4 skruvar.

Den Coronet 26 Familjen skjuten monteras som standard.


För det vatten som kommer in i detta rum har jag i botten av ankarkättingen lagring borrade ett hål på 10 mm.

Se bifogade bilder.

Another Photo

En annan bild.

Thanks a lot but I couldn't open the files with the photos.
Is it possible to send them to grc@csca.pt?

Thanks again.

Gonçalo Costa