Hej, jeg vil erstatte instrumentpanelet i min 32 Deepsea. Jeg har tænkt mig at bruge 6mm tyk bånd stribe Sapele krydsfiner, og jeg vil gerne have nogle meninger om, som er den bedste plan:
1.. Monter de instrumenter direkte på træet panelet.
2.. Monter de instrumenter i grupper til aluminiumsplader (omkring 2,5 mm tyk), som så ville blive fastgjort til træ panel, og som ville have den fordel, at én til at skære store og ikke ekstremt præcise åbninger i krydsfiner.
Tak for nogle gode råd.
George

Hello, I will replace the instrument panel in my 32 Deepsea. I'm going to use 6mm thick ribbon stripe Sapele plywood, and I'd like to get some opinions as to which is the best plan:
1. Mount the instruments directly on the wood panel.
2. Mount the instruments in groups to aluminium plates (about 2.5mm thick) which would then be fastened to the wood panel, and which would have the advantage of allowing one to cut large and not extremely precise openings in the plywood.
Thanks for any advice.
George